Three Versions to Choose

We have three versions of JN0-100 guide materials: Juniper Networks Certified Internet Associate (JNCIA-JUNOS) available on our test platform, including PDF, Software and APP online. The most popular one is PDF version and you can totally enjoy the convenience of this version, and this is mainly because there is a demo in it, therefore help you choose what kind of JN0-100 practice test are suitable to you and make the right choice. Besides PDF version of study materials can be printed into papers so that you are able to write some notes or highlight the emphasis. On the other hand, Software version of our JN0-100 study torrent is also welcomed by customers, especially for windows users. As for PPT online version, it is the third party application, as long as you download the app into your computer; you can enjoy the nice service from us.

As we all know it is not easy and smooth for everyone to obtain the JN0-100 certification, and especially for those people who cannot make full use of their sporadic time and are not able to study in a productive way. But you are lucky, we can provide you with well-rounded services on JN0-100 practice test materials to help you improve ability and come over difficulties when you have trouble studying. We would be very pleased and thankful if you can spare your valuable time to have a look about features of our JN0-100 study materials.

DOWNLOAD DEMO

High Quality and Efficiency

With our professional experts' unremitting efforts on the reform of our JN0-100 guide materials: Juniper Networks Certified Internet Associate (JNCIA-JUNOS), we can make sure that you can be focused and well-targeted in the shortest time when you are preparing a test, simplify complex and ambiguous contents, and point out exam focus in no time. With the assistance of our JN0-100 study torrent you will be more distinctive than your fellow workers, because you will learn to make full use of your fragment time to do something more useful in the same amount of time. All the above services of our JN0-100 practice test can enable your study more time-saving, energy-saving and labor-saving.

99% pass rate

We guarantee that if you study our JN0-100 guide materials: Juniper Networks Certified Internet Associate (JNCIA-JUNOS) with dedication and enthusiasm step by step, you will desperately pass the exam without doubt. As the authoritative provider of study materials, we are always in pursuit of high pass rate of JN0-100 practice test compared with our counterparts to gain more attention from potential customers. Otherwise if you fail to pass the exam unfortunately with our study materials, we will full refund the products cost to you soon. We believe in the future, our JN0-100 study torrent will be more attractive and marvelous with high pass rate.

Juniper Networks Certified Internet Associate (JNCIA-JUNOS) Sample Questions:

1. There are three static routes in the routing table that need to be announced to your OSPF peers.
Which method is used to accomplish this?

A) Apply an import policy to the static routes that injects the static routes into OSPF.
B) Apply an export policy to OSPF that injects the static routes into OSPF.
C) Apply an import policy to OSPF that injects the static routes into OSPF.
D) Apply an export policy to the static routes that injects the static routes into OSPF.

2. -- Exhibit -
[edit interfaces]
user@router# show
...
lo0 {
unit 0 {
family inet {
filter {
input protect-loopback;
}
address 192.168.100.1/32;
}
}
}
-- Exhibit --
Given the configuration shown in the exhibit, what is the function of the protect-loopback filter?

A) to protect the management interface
B) to protect the Packet Forwarding Engine
C) to protect the Routing Engine
D) to protect all interfaces on the device

3.
Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?

A) [edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}
}
then policer LIMIT-MAL-USER;
}
term two {
then accept;
}
}
}
B) [edit firewall]
user@router# show
policer LIMIT-BAD-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}
}
then policer LIMIT-MAL-USER;
}
term two {
then accept;
}
}
}
C) [edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
200.200.200.0/24;
}
destination-address {
100.100.100.10/32;
}
}
then policer LIMIT-MAL-USER;
}
term two { then accept; } } }
D) [edit firewall]
user@router# show
policer LIMIT-MAL-USER {
if-exceeding {
bandwidth-limit 400k;
burst-size-limit 100k;
}
then discard;
}
family inet {
filter STOP-MAL-USER {
term one {
from {
source-address {
100.100.100.10/32;
}
destination-address {
200.200.200.0/24;
}
}
then policer LIMIT-MAL-USER;
}
term two {
then reject;
}
}
}

4. What must be configured prior to the first commit after factory defaults are loaded?

A) host name
B) default gateway
C) root authentication
D) management services

5. -- Exhibit --
[edit routing-options]
user@router# show
static {
defaults {
metric 10;
preference 10;
}
route 10.10.10.0/24 {
next-hop 192.168.100.1;
qualified-next-hop 192.168.200.1;
preference 6;
}
metric 8;
}
}
-- Exhibit --
Given the configuration shown in the exhibit, which statement is correct about traffic matching the route 10.10.10.0/24?

A) It will be forwarded to 192.168.100.1 using a metric of 10.
B) It will be forwarded to 192.168.200.1 using a metric of 8.
C) It will be forwarded to 192.168.200.1 using a metric of 10.
D) It will be forwarded to 192.168.100.1 using a metric of 8.

Solutions: