[2022] Use Real Fortinet Dumps - 100% Free NSE7_EFW-6.4 Exam Dumps [Q61-Q85]

[2022] Use Real Fortinet Dumps - 100% Free NSE7_EFW-6.4 Exam Dumps

Realistic NSE7_EFW-6.4 Dumps Latest Fortinet Practice Tests Dumps

NEW QUESTION 61
Which statements about bulk configuration changes using FortiManager CLI scripts are correct? (Choose two.)

A. When executed on the Device Database, you must use the installation wizard to apply the changes to the managed FortiGate.
B. When executed on the Policy Package, ADOM database, changes are applied directly to the managed FortiGate.
C. When executed on the All FortiGate in ADOM, changes are automatically installed without creating a new revision history.
D. When executed on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.

Answer: A,D

Explanation:
Explanation
CLI scripts can be run in three different ways:Device Database: By default, a script is executed on the device database. It is recommend you run the changes on the device database (default setting), as this allows you to check what configuration changes you will send to the managed device. Once scripts are run on the device database, you can install these changes to a managed device using the installation wizard.
Policy Package, ADOM database: If a script contains changes related to ADOM level objects and policies, you can change the default selection to run on Policy Package, ADOM database and can then be installed using the installation wizard.
Remote FortiGate directly (through CLI): A script can be executed directly on the device and you don't need to install these changes using the installation wizard. As the changes are directly installed on the managed device, no option is provided to verify and check the configuration changes through FortiManager prior to executing it.

NEW QUESTION 62
Examine the output of the 'get router info ospfneighbor' command shown in the exhibit; then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

A. The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network.
B. The local FortiGate is the backup designated router for the wan1 network.
C. The interface ToRemote is OSPF network type point-to-point.
D. The OSPF router with the ID 0.0.0.2is the designated router for the ToRemote network.

Answer: B,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

NEW QUESTION 63
View the exhibit, which contains the output of a debug command, and then answer the question below.

What statement is correct about this FortiGate?

A. It is currently in kernel conserve mode because of high memory usage.
B. It is currently in FD conserve mode.
C. It iscurrently in system conserve mode because of high CPU usage.
D. It is currently in system conserve mode because of high memory usage.

Answer: D

NEW QUESTION 64
Refer to the exhibit, which contains the output of a BGP debug command.

Which statement about the exhibit is true?

A. Since the counters were last reset, the 10.200.3.1 peer has never been down.
B. The local router has not established a TCP session with 100.64.3.1.
C. The local router has received a total of three BGPprefixes from all peers.
D. The local router BGP state is OpenConfirm with the 10.127.0.75 peer.

Answer: B

NEW QUESTION 65
Which real time debug should an administrator enable to troubleshoot RADIUS authentication problems?

A. Diagnose radius console -log enable.
B. Diagnose debug application fnbamd -1.
C. Diagnose debug application radius -1.
D. Diagnose authd console -log enable.

Answer: B

Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD32838

NEW QUESTION 66
View the exhibit, which contains the output of a diagnose command, and then answer the question below.

What statements are correct regarding the output? (Choose two.)

A. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.
B. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.
C. This is an expected session created by an application control profile.
D. This is an expected session created by a session helper.

Answer: A,D

NEW QUESTION 67
What does the dirty flag mean in aFortiGate session?

A. The session must be removed from the former primary unit after an HA failover.
B. Traffic has been blocked by the antivirus inspection.
C. Traffic has been identified as from an application that is not allowed.
D. The next packet must be re-evaluated against the firewall policies.

Answer: D

Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD40119&sliceId=1

NEW QUESTION 68
Which of the following statements is trueregarding a FortiGate configured as an explicit web proxy?

A. FortiGate limits the total number of simultaneous explicit web proxy users.
B. FortiGate limits the number of workstations that authenticate using the same web proxy usercredentials.
This limit CANNOT be modified by the administrator.
C. FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator
D. FortiGate limits the number of simultaneous sessions per explicit web proxy user. This limit CANNOT be modified by the administrator.

Answer: A

Explanation:
Explanation
https://help.fortinet.com/fos50hlp/52data/Content/FortiOS/fortigate-WAN-opt-52/web_proxy.htm#Explicit2 The explicit proxy does not limit the number of active sessions for each user. As a result the actual explicit proxy session count is usually much higherthan the number of explicit web proxy users. If an excessive number of explicit web proxy sessions is compromising system performance you can limit the amount of users if the FortiGate unit is operating with multiple VDOMs.

NEW QUESTION 69
View the exhibit, which contains the output of a diagnose command, and then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

A. FortiGate used 209.222.147.3 as the initial server to validate its contract.
B. Servers with a negative TZ value are experiencing a service outage.
C. Servers with the D flag are considered to be down.
D. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.

Answer: A,D

Explanation:
Explanation
A - because flag is Failed so fortigate will check if server is available every 15 minD-state is I , contact to validate contract info

NEW QUESTION 70
View the exhibit, which contains the output of a diagnose command, and the answer the question below.

Which statements are true regarding the Weight value?

A. Its value is incremented with each packet lost.
B. Its initial value is statically set to 10.
C. It determines which FortiGuard server is used for license validation.
D. Its initial value is calculated based on the round trip delay (RTT).

Answer: A

NEW QUESTION 71
Which two statements about the Security Fabric are true? (Choose two.)

A. Branch FortiGate devices must be configured first.
B. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.
C. All FortiGate devices in the Security Fabric must have bidirectional FortiTelemetry connectivity.
D. Only the root FortiGate collects network information and forwards it to FortiAnalyzer.

Answer: B,C

NEW QUESTION 72
Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id="xxxxxxx" log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg="NAT port is exhausted." What does the log mean?

A. The limit for the maximum number of entries in the NAT port table has been reached.
B. The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.
C. FortiGate does not have any available NAT port for a new connection.
D. There is not enough available memory in the system to create a new entry inthe NAT port table.

Answer: B

NEW QUESTION 73
Examine the output of the 'diagnose ips anomaly list' command shown in the exhibit; then answer the question below.

Which IP addresses are included in the output of thiscommand?

A. Those whose traffic matches a DoS policy.
B. Those whose traffic was detected as an anomaly by an IPS sensor.
C. Those whose traffic exceeded a threshold of a matching DoS policy.
D. Those whose traffic matches an IPS sensor.

Answer: A

NEW QUESTION 74
What is the purpose of an internal segmentation firewall (ISFW)?

A. It inspects incoming traffic to protect services in the corporate DMZ.
B. It splits the network into multiple security segments to minimize the impact of breaches.
C. It is the first line of defense at the network perimeter.
D. It is an all-in-one security appliance that is placed at remote sites to extend the enterprise network.

Answer: B

Explanation:
ISFW splits your network into multiple security segments. They serve as a breach containers from attacks that come from inside.

NEW QUESTION 75
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:

Which statements are true regarding the output in the exhibit? (Choose two.)

A. The state of the remote BGP peer isOpenConfirm.
B. BGP peers have successfully interchangedOpenandKeepalivemessages.
C. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
D. Local BGP peer received a prefix fora default route.

Answer: B,D

NEW QUESTION 76
Examine the output of the 'diagnose sys session list expectation' command shown in the exhibit; than answer the question below.

Which statement is true regarding the session in the exhibit?

A. It was created by the FortiGate kernel to allow push updates from FotiGuard.
B. It was created by a session helper or ALG.
C. It is for management traffic terminating at the FortiGate.
D. It is for traffic originated from the FortiGate.

Answer: B

NEW QUESTION 77
When using the SSL certificate inspection method for HTTPS traffic, how does FortiGate filter web requests when the browser client does not provide the server name indication (SNI) extension?

A. FortiGate uses the requested URL from the user's web browser.
B. FortiGate uses CN information from the Subject field in the server's certificate.
C. FortiGate switches to the full SSL inspection method to decrypt the data.
D. FortiGate blocks the request without any further inspection.

Answer: B

NEW QUESTION 78
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?

A. The FortiGate cannot resolve the name of the workstation.
B. The remote registry service is not running in the workstation 192.168.12.232.
C. The CA cannot resolve the name of the workstation.
D. The CA cannot reach the FortiGate with the IP address 192.168.12.232.

Answer: B

NEW QUESTION 79
View the exhibit, which contains a screenshot of some phase-1 settings, and then answer the question below.

The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:

However, the IKE real time debug does not show any output. Why?

A. The log-filter setting was set incorrectly. The VPN's traffic does not match this filter.
B. The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.
C. The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.
D. The debug shows only error messages. If there is no output, then the tunnel is operating normally.

Answer: A

NEW QUESTION 80
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)

A. OSPF interface area.
B. OSPF interface cost.
C. Interface subnet mask.
D. Router ID.
E. OSPF interface MTU.

Answer: A,C,E

NEW QUESTION 81
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.

Which statements about this debug output are correct? (Choose two.)

A. The initiator has provided remote as its IPsec peer ID.
B. It showsa phase 1 negotiation.
C. The negotiation is using AES128 encryption with CBC hash.
D. The remote gateway IP address is 10.0.0.1.

Answer: A,B

NEW QUESTION 82
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr 19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?

A. There are communication problems between the IPS engine and the management database.
B. All IPS-related features have been disabled in FortiGate's configuration.
C. IPS engine memory consumption has exceeded the model-specific predefined value.
D. IPS daemon experienced a crash.

Answer: B

Explanation:
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes. Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated: Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)

NEW QUESTION 83
What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.)

A. Reduce the session time to live.
B. Increase the FortiGuard cache time to live.
C. Increase the TCP session timers.
D. Reduce the maximum file size to inspect.

Answer: A,D

NEW QUESTION 84
Examine the output ofthe 'get router info bgp summary' command shown in the exhibit; then answer the question below.

Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?

A. The local peer has received the BGP prefixed from the remote peer.
B. The TCP session for the BGP connection to 10.200.3.1 is down.
C. The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.
D. The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.

Answer: B

Explanation:
Explanation
http://www.ciscopress.com/articles/article.asp?p=2756480

NEW QUESTION 85
......