[Sep 13, 2023] Get Unlimited Access to NSE7_OTS-6.4 Certification Exam Cert Guide
Reliable Study Materials for NSE7_OTS-6.4 Exam Success For Sure
Fortinet NSE7_OTS-6.4 (Fortinet NSE 7 - OT Security 6.4) Exam is a certification that focuses on the skills and knowledge required to protect operational technology (OT) networks. OT networks are used in industrial environments such as manufacturing plants, power plants, and transportation systems. These networks differ from traditional IT networks in that they control physical processes and equipment. Due to their critical nature, OT networks require specialized security measures to protect against cyber threats. The Fortinet NSE7_OTS-6.4 Exam covers topics such as OT network architecture, threat detection and prevention, security policies and procedures, and risk management.
Fortinet NSE7_OTS-6.4 certification exam is designed for professionals who specialize in operational technology (OT) security. Fortinet NSE 7 - OT Security 6.4 certification exam is offered by Fortinet, a leading provider of cybersecurity solutions for businesses and organizations worldwide. NSE7_OTS-6.4 exam is designed to test the knowledge and skills of professionals who are responsible for securing OT networks from cyber threats.
NEW QUESTION # 20
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. TACACS
- B. API
- C. SNMP
- D. RADIUS
- E. ICMP
Answer: B,C,D
NEW QUESTION # 21
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. End station traffic monitoring
- B. MAC notification traps
- C. Link traps
- D. RADIUS
Answer: D
Explanation:
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
Reference:
Fortinet NSE 7 - OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-28.
NEW QUESTION # 22
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. List
- B. Overview
- C. IPS
- D. Risk
- E. Security
Answer: A,B,D
NEW QUESTION # 23
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Importation and classification of hosts
- B. Enhanced point of connection details
- C. Adapter consolidation for multi-adapter hosts
- D. Direct VLAN assignment
Answer: A,B
Explanation:
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 24
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiNAC determined the user by DHCP fingerprint method
- B. FortiGate determined the user by passive authentication
- C. Two-factor authentication is not configured with RADIUS authentication method
- D. The user was determined by Security Fabric
Answer: B
NEW QUESTION # 25
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a third-party RADIUS OTP server.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use the user self-registration server.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 26
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. PLCs use IEEE802.1Q protocol to communicate each other.
- B. An administrator can create firewall policies in the switch to secure between PLCs.
- C. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- D. There is no micro-segmentation in this topology.
Answer: D
NEW QUESTION # 27
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- B. The FortiGate devices is in offline IDS mode.
- C. The FortiGate-Edge device must be in NAT mode.
- D. Port5 is not a member of the software switch.
Answer: A,C
NEW QUESTION # 28
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched security policy
- B. A linkup or linkdown trap
- C. A failed Layer 3 poll
- D. A matched profiling rule
Answer: B
NEW QUESTION # 29
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for network micro-segmentation.
- B. It can be used for industrial intrusion detection and prevention.
- C. It can be used for IoT device detection.
- D. It can be used for device profiling.
Answer: A,D
NEW QUESTION # 30
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiNAC
- C. FortiEDR
- D. FortiSwitch
Answer: A
Explanation:
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 31
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a third-party RADIUS OTP server.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use the user self-registration server.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 32
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
- B. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- C. Create a notification policy and define a script/remediation on FortiSIEM.
- D. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
Answer: C
Explanation:
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 33
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Host or user group memberships
- B. Location
- C. An existing access control policy
- D. Administrative group membership
- E. Host or user attributes
Answer: A,B,E
NEW QUESTION # 34
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You must set correct operator in event handler to trigger an event.
- B. You can automate SOC tasks through playbooks.
- C. You cannot use Windows and Linux hosts security events with FortiSoC.
- D. Each playbook can include multiple triggers.
Answer: A,B
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 35
What can be assigned using network access control policies?
- A. Layer 3 polling intervals
- B. FortiNAC device polling methods
- C. Profiling rules
- D. Logical networks
Answer: D
NEW QUESTION # 36
......
Fortinet NSE7_OTS-6.4 exam is a comprehensive exam that covers a range of topics related to OT security. NSE7_OTS-6.4 exam is designed to test the candidate's knowledge and skills in OT security and to ensure that they have the necessary skills to secure ICS and SCADA systems. NSE7_OTS-6.4 exam is also designed to ensure that the candidate has the necessary knowledge and skills to comply with industry regulations and standards related to OT security.
New Fortinet NSE7_OTS-6.4 Dumps & Questions: https://simplilearn.actual4labs.com/Fortinet/NSE7_OTS-6.4-actual-exam-dumps.html